CHE Publication

[dsm_advanced_tabs dsm_tabs_active_bg_color=”gcid-secondary-color” dsm_tabs_active_text_color=”#FFFFFF” _builder_version=”4.27.3″ _module_preset=”default” hover_enabled=”0″ border_radii=”on|10px|10px|10px|10px” box_shadow_style=”preset3″ global_colors_info=”{%22gcid-secondary-color%22:%91%22dsm_tabs_active_bg_color%22%93}” sticky_enabled=”0″][dsm_advanced_tabs_child dsm_title=”2015″ dsm_content=”

Publication for 2015

Index by Web of Science

Tabari, A., Ahmad, A., “A semicontinuous approach for heterogeneous azeotropic distillation processes”, Computers and Chemical Engineering (2015), Vol 73, pgs.183–190.(IF=2.784).
Salamun, N., Triwahyono, S., Jalil, A.A., Matsuura, T., Salleh, N.F.M., “Acid-vacuo heat treated low cost banana stems fiber for efficient biosorption of Hg(II)”, RSC Advances (2015), Vol 5(19), pgs. 14129-14137.(IF=3.84).
Rahmanian, A., Ahmad Zaini, M.A., Tuan Abdullah, T.A., “Carbon dioxide capture from reforming gases using acetic acid-mixed chemical absorbents”, Bulletin of the Korean Chemical Society (2015), Vol 36(7), pgs. 1940-1943.(IF= 797).
Aziz, M.A.A., Jalil, A.A., Triwahyono, S., Ahmad, A., “CO2 methanation over heterogeneous catalysts: Recent progress and future prospects”, Green Chemistry (2015), Vol 17(5), pgs. 2647-2663.(IF= 02).
Sidik, S.M., Jalil, A.A., Triwahyono, S., Abdullah, T.A.T., Ripin, A.; “CO2 reforming of CH4 over Ni/mesostructured silica nanoparticles (Ni/MSN)”, RSC Advances (2015), Vol 5(47), pgs. 37405-37414.(IF= 84).
Wong, S.L., Ngadi, N., Abdullah, T.A.T., Inuwa, I.M., “Current state and future prospects of plastic waste as source of fuel: A review”, Renewable and Sustainable Energy Reviews (2015), Vol 50, pgs. 1167-1180.(IF= 901).
Pandian, S., Hassim, M.H., Ng, R.T.L., Hurme, M., “Designing an inherently healthier process based on inherently safer design (ISD) concept: research and development stage”, Clean Technologies and Environmental Policy (2015), .(IF= 934).
Jaafar, N.F., Jalil, A.A., Triwahyono, S., Efendi, J., Mukti, R.R., Jusoh, R., Jusoh, N.W.C., Karim, A.H., Salleh, N.F.M., Suendo, V.; “Direct in situ activation of Ag0 nanoparticles in synthesis of Ag/TiO2 and its photoactivity”, Applied Surface Science(2015), Vol 338, pgs. 75-84 (IF= 711).
Ahmed, S.I., Johari, A., Hashim, H., Lim, J.S., Jusoh, M., Mat, R., Alkali, H., “Economic and environmental evaluation of landfill gas utilisation: A multi-period optimisation approach for low carbon regions”, International Biodeterioration and Biodegradation (2015), Vol 102, pgs. 191-201 (IF= 131).
Kamarudin, N.H.N., Jalil, A.A., Triwahyono, S., Sazegar, M.R., Hamdan, S., Baba, S., Ahmad, A., “Elucidation of acid strength effect on ibuprofen adsorption and release by aluminated mesoporous silica nanoparticles”, RSC Advances (2015), Vol 5(38), pgs. 30023-30031 (IF= 84).
Dorraj, M., Abdollahi, Y., Mohd Said, S.B., Bin Mohd Sabri, M.F., Sairi, N.A., Meng, W.P., Abouzari-Lotf, E.. “Enhance protection of electronic appliances through multivariate modelling and optimization of ceramic core materials in varistor devices”, RSC Advances (2015), Vol 5(27), pgs. 21384-21395 (IF= 84).
Abdollahi, Y., Said, S.B.M., Sairi, N.A., Sabri, M.F.B.M., Zakaria, A., Abouzari-lotf, E., Dorraj, M., Aziz, R.S., “Enhancement of electronic protection to reduce e-waste”, Journal of Industrial and Engineering Chemistry (2015), Vol 29, pgs. 400-407 (IF= 512).
Jalil, A.A., Triwahyono, S., Karim, A.H., Nordin, N.K., Asli, U.A., Hassim, M.H., Prasetyoko, D., “Grape-like mesostructured silica nanoparticle-decorated single-walled carbon nanotubes: Silica growth and dye adsorptivity:, RSC Advances(2015), Vol 5, pgs. 71796-71804 (IF= 84).
Tavakoly Sany, S.B., Hashim, R., Rezayi, M., Rahman, M.A., Razavizadeh, B.B.M., Abouzari-lotf, E., Karlen, D.J., “Integrated ecological risk assessment of dioxin compounds”, Environmental Science and Pollution Research (2015), Vol 22(15), pgs. 11193-11208 (IF= 828).
Sithambaranathan, P., Nasef, M.M., Ahmad, A., “Kinetic behaviour of graft copolymerisation of nitrogenous heterocyclic monomer onto EB-irradiated ETFE films”, Journal of Radioanalytical and Nuclear Chemistry (2015), Vol 304(3), pgs. 1225-1234 (IF= 034).
Mahdi, T., Ahmad, A., Ripin, A., Abdullah, T.A.T., Nasef, M.M., Ali, M.W., “Mathematical modeling of a single stage ultrasonically assisted distillation process”, Ultrasonics Sonochemistry (2015), Vol 24, pgs. 184-192 (IF= 321).
Teh, L.P., Triwahyono, S., Jalil, A.A., Mukti, R.R., Aziz, M.A.A., Shishido, T., “Mesoporous ZSM5 having both intrinsic acidic and basic sites for cracking and methanation”, Chemical Engineering Journal (2015), Vol 270, pgs. 196-204 (IF= 321).
Kidam, K., Sahak, H.A., Hassim, M.H., Hashim, H., Hurme, M., “Method for identifying errors in chemical process development and design base on accidents knowledge”, Process Safety and Environmental Protection (2015), Vol 97, pgs. 49-60 (IF= 551).
Abdollahi, Y., Zakaria, A., Said, S.B.M., Sabri, M.F.B.M., Sairi, N.A., Rezayi, M., Abouzari-lotf, E., Dorraj, M., Islam, A., “Modeling of photodegradation process to remove the higher concentration of environmental pollution”, Desalination and Water Treatment (2015), (IF= 173).
Ting, T.M., Nasef, M.M., Hashim, K., “Modification of nylon-6 fibres by radiation-induced graft polymerisation of vinylbenzyl chloride”, Radiation Physics and Chemistry (2015), Vol 109, pgs. 54-62 (IF= 38).
Salleh, N.F.M., Jalil, A.A., Triwahyono, S., Efendi, J., Mukti, R.R., Hameed, B.H., “New insight into electrochemical-induced synthesis of NiAl2O4/Al2O3: Synergistic effect of surface hydroxyl groups and magnetism for enhanced adsorptivity of Pd(II)”, Applied Surface Science (2015), Vol 349, pgs. 485-495 (IF= 711).
Teh, L.P., Triwahyono, S., Jalil, A.A., Mamat, C.R., Sidik, S.M., Fatah, N.A.A., Mukti, R.R., Shishido, T., “Nickel-promoted mesoporous ZSM5 for carbon monoxide methanation”, RSC Advances (2015), Vol 5 (79), pgs. 64651-64660 (IF= 84).
Mehdipour-Ataei, S., Babanzadeh, S., Abouzari-Lotf, E., “Nicotinic-based poly(amide-ether-imide)s: A new category of soluble, heat-resistant, and flame-retardant polyimides”, Designed Monomers and Polymers (2015), Vol 18 (5), pgs. 451-459 (IF= 78).
Ahmed, S.I., Johari, A., Hashim, H., Mat, R., Lim, J.S., Ngadi, N., Ali, A., “Optimal landfill gas utilization for renewable energy production”, Environmental Progress and Sustainable Energy (2015), pgs. Vol 34 (1), pgs. 289-296 (IF= 403).
Ng, R.T.L., Ng, D.K.S., Tan, R.R., “Optimal planning, design and synthesis of symbiotic bioenergy parks”, Journal of Cleaner Production (2015), Vol 87 (C) , pgs. 291-302 (IF= 844).
Ng, R.T.L., Ng, D.K.S., Tan, R.R., “Optimal planning, design and synthesis of symbiotic bioenergy parks”, Journal of Cleaner Production (2015), Vol 87 (1) , pgs. 291-302 (IF= 844).
Jusoh, R., Jalil, A.A., Triwahyono, S., Idris, A., Noordin, M.Y., “Photodegradation of 2-chlorophenol over colloidal α-FeOOH supported mesostructured silica nanoparticles: Influence of a pore expander and reaction optimization”, Separation and Purification Technology (2015), Vol 149 , pgs. 55-64 (IF= 091).
Wong, S.L., Ngadi, N., Amin, N.A.S., Abdullah, T.A.T., Inuwa, I.M., “Pyrolysis of low density polyethylene waste in subcritical water optimized by response surface methodology”, Environmental Technology (United Kingdom) (2015), (IF= 56).
Wong, S.L., Ngadi, N., Abdullah, T.A.T., Inuwa, I.M., “Recent advances of feed-in tariff in Malaysia”, Renewable and Sustainable Energy Reviews (2015), Vol 41 , pgs. 42-52(IF= 901).
Abdollahi, Y., Sairi, N.A., Said, S.B.M., Abouzari-Lotf, E., Zakaria, A., Sabri, M.F.B.M., Islam, A., Alias, Y., “Scheduling the blended solution as industrial CO2 absorber in separation process by back-propagation artificial neural networks”, Spectrochimica Acta – Part A: Molecular and Biomolecular Spectroscopy (2015), Vol 150 , pgs. 892-901 (IF= 353).
Mahdi, T., Ahmad, A., Nasef, M.M., Ripin, A., “State-of-the-art technologies for separation of azeotropic mixtures”, Separation and Purification Reviews (2015), Vol 44 (4), pgs. 308-330 (IF= 824).
Ng, R.T.L., Hassim, M.H., “Strategies for assessing and reducing inherent occupational health hazard and risk based on process information”, Process Safety and Environmental Protection (2015), Vol 97,pgs. 91-101 (IF= 551).
Jusoh, N.W.C., Jalil, A.A., Triwahyono, S., Karim, A.H., Salleh, N.F., Annuar, N.H.R., Jaafar, N.F., Firmansyah, M.L., Mukti, R.R., Ali, M.W., “Structural rearrangement of mesostructured silica nanoparticles incorporated with ZnO catalyst and its photoactivity: Effect of alkaline aqueous electrolyte concentration”, Applied Surface Science (2015), Vol 330, pgs. 91-101 (IF= 711).
Zakeri, M., Nasef, M.M., Abouzari-Lotf, E., Moharami, A., Heravi, M.M., “Sustainable alternative protocols for the multicomponent synthesis of spiro-4H-pyrans catalyzed by 4-dimethylaminopyridine”, Journal of Industrial and Engineering Chemistry (2015), Vol 29, pgs. 273-281 (IF= 512).
Jusoh, R., Jalil, A.A., Triwahyono, S., Kamarudin, N.H.N., “Synthesis of dual type Fe species supported mesostructured silica nanoparticles: Synergistical effects in photocatalytic activity”, RSC Advances (2015), Vol 5(13), pgs. 9727-9736 (IF= 84).
Jusoh, N.W.C., Jalil, A.A., Triwahyono, S., Mamat, C.R., “Tailoring the metal introduction sequence onto mesostructured silica nanoparticles framework: Effect on physicochemical properties and photoactivity”, Applied Catalysis A: General (2015), Vol 492, pgs. 169-176 (IF= 942).
Johari, A., Nyakuma, B.B., Mohd Nor, S.H., Mat, R., Hashim, H., Ahmad, A., Yamani Zakaria, Z., Tuan Abdullah, T.A., “The challenges and prospects of palm oil based biodiesel in Malaysia”, Energy (2015), Vol 81, pgs. 255-261 (IF= 844).
Ting, T.M., Nasef, M.M., Hashim, K., “Tuning N-methyl-d-glucamine density in a new radiation grafted poly(vinyl benzyl chloride)/nylon-6 fibrous boron-selective adsorbent using the response surface method”, RSC Advances (2015), Vol 5(47), pgs. 37869-37880 (IF= 84).

Index By Scopus

Oladokun, O., Ahmad, A., Kamaroddin, M.F.A., Abdullah, T.A.T., Nyakuma, B.B., “A quasi steady state model for flash pyrolysis of biomass in a transported bed reactor”, Jurnal Teknologi (2015), Vol 75(1), pgs. 35-41.
Al-shanini, A., Ahmad, A., Khan, F., Oladokun, O., Mohd Nor, S.H., “Alternative Prediction Models for Data Scarce Environment”, Computer Aided Chemical Engineering (2015), Vol 37, pgs. 665-670.
Salleh, N.F.M., Jalil, A.A., Triwahyono, S., Nordin, S.N., Kamarudin, N.H.N., Effendi, J., “Amine modified mesostructured silica nano particles enhanced adsorption of phenol”, Jurnal Teknologi (2015), Vol 75, pgs. 1-6.
Jalani, J.A., Kidam, K., Shahlan, S.S., Kamarden, H., Hassan, O., Hashim, H., “An analysis of major accident in the US chemical safety board (CSB) database”, Jurnal Teknologi (2015), Vol 75, pgs. 53-60.
Hussin, N.E., Kidam, K., Jalani, J.J., Johari, A., Hashim, H., Hassim, M.H., “Application of risk reduction strategies in the chemical process industry”, Jurnal Teknologi (2015), Vol 75, pgs. 127-135.
Ahmad, N., Hassim, M.H., “Assessment of indoor air quality level and sick building syndrome according to the ages of building in Universiti Teknologi Malaysia”, Jurnal Teknologi (2015), Vol 76(1), pgs. 1163-170.
Rachman, M.A., Eniya, L.D., Widyastuti, E.T., “Biohydrogen production from fermentation of sweet sorhgum (Sorghum biocular L) by Interobacter aerogenes ADH-43 in the packed-bed reactor”, Jurnal Teknologi (2015), Vol 75, pgs. 67-72.
Suahadah, S.N., Kamarudin, K.S.N., Najib, S.B.M., Dolmat, N., “Carbon dioxide removal in emulsion liquid membrane containing 2-amino-2-methyl-1-propanol /monoethanolamine”, Jurnal Teknologi (2015), Vol 75, pgs. 61-65.
Sadikin, A.N., Nawawi, M.G.M., Othman, N., Asli, U.A., Ali, R.R., Hasbullah, H., Ibrahim, N., “Effect of chitosan binder on water absorption of empty fruit bunches filter media %91Kesan Kitosan Sebagai Pengikat Keatas Penjerapan Air Media Penapis Tandan Kosong Kelapa Sawit%93”, Malaysian Journal of Analytical Sciences (2015), Vol 19(1), pgs. 155-162.
Triwahyono, S., Jalil, A.A., Azman, H.A., Mamat, C.R., “Isomerization of C5-C7 linear alkanes over WO3-ZRO2 under helium atmosphere”, Jurnal Teknologi (2015), Vol 75, pgs. 119-125.
Hussin, N.A.E., Kidam, K., Shahlan, S.S., Johari, A., Hashim, H., “Lessons learned from process equipment failures in the chemical process industry”, Jurnal Teknologi (2015), Vol 75, pgs. 43-52.
Al-Shanini, A., Ahmad, A., Khan, F., Hassim, M., Al-Shatri, A., “Modeling the impact of natural and security hazards in an lng processing facilitity”, Jurnal Teknologi (2015), Vol 75, pgs. 17-25.
Ahmed, S.I., Johari, A., Hashim, H., Mat, R., Lim, J.S., Jusoh, M., Alkali, H., Hafshar, S.S., “Optimization approach for greenhouse gas to green energy for a low carbon region of Iskandar Malaysia”, Jurnal Teknologi (2015), Vol 75.
Ali, A.A., Nasef, M.M., Saidi, H., Ahmad, A., “Preparation and characterization of poly(1-vinyl imidazole)-graft-ETFE/phosphoric acid proton conducting membranes”, Jurnal Teknologi (2015), Vol 75, pgs. 95-102.
Aliyu Bello, A., Ahmad, A., Ripin, A., “Process simulation of pineapple juice spray drying”, Jurnal Teknologi (2015), Vol 75, pgs. 27-34.
Yahaya, S.R., Hassim, M.H., “Radiation risk estimation from occupational medical imaging exposure in Malaysia”, Jurnal Teknologi (2015), Vol 75, pgs. 87-94.
Nkem, A.N., Hassim, M.H., Kidam, K., “Relationship between unsafe acts/condition and accidents in construction company in Nigeria”, Jurnal Teknologi (2015), Vol 75, pgs. 73-77.
Sadikin, A.N., Nawawi, M.G.M., Othman, N., Ali, R.R., Asli, U.A., “Removal of oily wastewater using chitosan-filled filter media”, Jurnal Teknologi (2015), Vol 74(7), pgs. 111-115.

” _builder_version=”4.27.3″ _module_preset=”default” tab_title_font_size=”14px” tab_title_line_height=”1.7em” global_colors_info=”{}” parentOrderClass=”dsm_advanced_tabs_0″][/dsm_advanced_tabs_child][dsm_advanced_tabs_child dsm_title=”2014″ _builder_version=”4.27.3″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” parentOrderClass=”dsm_advanced_tabs_0″ dsm_content=”

Publication for 2014

Index by Web of Science

Ashnani, MHM; Johari, A; Hashim, H; Hasani, E, “A source of renewable energy in Malaysia, why biodiesel?” Renewable & Sustainable Energy Reviews (2014) Vol 35, 244–257.(IF=5.901).
Johari, A; Mat, R; Alias, H; Hashim, H; Hassim, MH; Zakaria, ZY; Rozainee, M. “Combustion Characteristics of Refuse Derived Fuel (RDF) in a Fluidized Bed Combustor”, Sains Malaysiana (2014) Vol 43(1), pgs. 103–109.(IF=0.48)
Abbaszadeh, S; Hassim, MH. “Comparison of methods assessing environmental friendliness of petrochemical process design”, Journal Of Cleaner Production (2014) Vol 71, pgs.110–117. (IF=3.844)
Annuar, NHR; Jalil, AA; Triwahyono, S; Fatah, NAA; Teha, LP; Mamat, CR, “Cumene cracking over chromium oxide zirconia: Effect of chromium(VI) oxide precursors”, Applied Catalysis A: General (2014) Vol 475, pgs. 487–496. (IF=3.942)
Abbasi A., Nasef M.M., Takeshi M., Faridi-Majidi R., “Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships”; Chinese Journal of Polymer Science (English Edition) (2014) Vol 32(6), pgs.793―804.(IF=1.27).
Abdullah, TAT; Croiset, E, “Evaluation of an Inconel-625 Reactor and its Wall Effects on Ethanol Reforming in Supercritical Water”, Industrial & Engineering Chemistry Research (2014) Vol 53(6), pgs. 2121–2129.(IF=3.512).
Aziz, MAA; Jalil, AA; Triwahyono, S; Mukti, RR; Taufiq-Yap, YH; Sazegar, MR, “Highly active Ni-promoted mesostructured silica nanoparticles for CO2 methanation”, Applied Catalysis B: Environmental (2014) Vol 147, pgs. 359–368.(IF=7.435)
Lani N.S., Ngadi N., Johari A., Jusoh M., “Isolation, Characterization, and Application of Nanocellulose from Oil Palm Empty Fruit Bunch Fiber as Nanocomposites”, Journal Of Nanomaterials (2014) Vol 421, pgs. 93–102.(IF=1.644)
Ashnani, MHM; Johari, A; Hashim, H; Hasani, E, “Life cycle optimisation (LCO) of product systems with consideration of occupational fatalities”, 4th Mechanical And Manufacturing Engineering, Pts 1 And 2 (2014) Vol 465-466, pgs. 1080-1086.(IF=2.55).
Nasef, MM; Ali, AA; Saidi, H; Ahmad, A, “Multi-objective design of industrial symbiosis in palm oil industry”, Radiation Physics And Chemistry (2014) Vol 94(1), pgs. 123–128. (IF=1.380).
Abouzari-Lotf E., Shockravi A., Rafieimanesh A., Saremi M., Javadi A., Nasef M.M., “Numerical Descriptive Inherent Safety Technique (NuDIST) for inherent safety assessment in petrochemical industry”, RSC Advances (2014) Vol 4(35), pgs. 17993―18002. (IF=3.84).
Shamsaei, E; Nasef, MM; Saidi, H; Yahaya, AH, “Preparation of Ni loaded on zeolite and its application for conversion of glycerol to hydrogen”, Radiochimica Acta (2014) Vol 102(4), pgs. 351–362. (IF=1.373)
Sazegar, MR; Jalil, AA; Triwahyono, S; Mukti, RR; Aziz, M; Aziz, MAA; Setiabudi, HD; Kamarudin, NHN, “Review of evolution, technology and sustainability assessments of biofuel production”, Chemical Engineering Journal (2014) Vol 240, pgs. 352–361. (IF=4.321)
Liew, WH; Hassim, MH; Ng, DKS, “Selective Acetalization of Glycerol with Acetone Over Nickel Nanoparticles Supported on Multi-Walled Carbon Nanotubes”, Journal Of Cleaner Production (2014) Vol 71, pgs.11-29. (IF=3.844)
Khayoon, MS; Abbas, A; Hameed, BH; Triwahyono, S; Jalil, AA; Harris, AT; Minett, AI, “Self-Organizing Map Based Fault Diagnosis Technique for Non-Gaussian Processes”, Catalysis Letters (2014) Vol 144(6), pgs.1009–1015. (IF=2.244)
Yu, HY; Khan, F; Garaniya, V; Ahmad, A, “Sustainability assessment for biodiesel production via fuzzy optimisation during research and development (R&D) stage”, Industrial & Engineering Chemistry Research (2014) Vol 53(21), pgs. 8831–8843. (IF=2.20)
Jusoh, R; Jalil, AA; Triwahyono, S; Idris, A; Haron, S; Sapawe, N; Jaafar, NF; Jusoh, NWC, “The effectiveness of emergency response plan in specialty chemicals company in Malaysia”, Applied Catalysis A: General (2014) Vol 469, pgs. 33-44. (IF=3.942)
Mahdi, T; Ahmad, A; Ripin, A; Nasef, MM, “Variation of the crystal growth of mesoporous silica nanoparticles and the evaluation to ibuprofen loading and release”, Korean Journal Of Chemical Engineering (2014) Vol 31-5, pgs. 875-880. (IF=1.059)
Al-shanini A., Ahmad A., Khan F., “Accident modelling and safety measure design of a hydrogen station”, International Journal of Hydrogen Energy (2014). (IF=3.133).
Kidam K., Hussin N.E., Hassan O., Ahmad A., Johari A., Hurme M., “Accident prevention approach throughout process design life cycle”, Process Safety and Environmental Protection (2014) (IF=2.551).
El-Hefian E.A., Nasef M.M., Yahaya A.H., “Chitosan-based polymer blends: Current status and applications”, Journal of the Chemical Society of Pakistan (2014) Vol 36(1), pgs. 11―27.(IF=0.612).
Mokhtar M.M., Hassim M.H., Taib R.M., “Health risk assessment of emissions from a coal-fired power plant using AERMOD modelling”, Process Safety and Environmental Protection (2014) (IF=2.551).
Khayoon M.S., Triwahyono S., Hameed B.H., Jalil A.A., “Improved production of fuel oxygenates via glycerol acetylation with acetic acid”, Chemical Engineering Journal (2014) Vol 243, pgs.473―484. (IF=4.321).
Karim A.H., Jalil A.A., Triwahyono S., Kamarudin N.H.N., Ripin A., “Influence of multi-walled carbon nanotubes on textural and adsorption characteristics of in situ synthesized mesostructured silica”, Journal of Colloid and Interface Science (2014) Vol 421, pgs. 93―102. (IF=3.368).
Ramadhan N.J., Wan Y.K., Ng R.T.L., Ng D.K.S., Hassim M.H., Aviso K.B., Tan R.R., “Measurement of PCDD/Fs emissions from a coal-fired power plant in Malaysia and establishment of emission factors”, Process Safety and Environmental Protection (2014) (IF=2.551).
Mokhtar M.M., Taib R.M., Hassim M.H., “Modeling and optimization aspects of radiation induced grafting of 4-vinylpyridene onto partially fluorinated films”, Atmospheric Pollution Research (2014) Vol 5(3), pgs. 388―397. (IF=1.371).
Mahmoud Nasef M., Abbasi A., Ting T.M., “Novel polyoxadiazoles with non-coplanar ortho-linked structures as highly CO2 permselective membranes”, Radiation Physics and Chemistry (2014) Vol 103, pgs.72-74 (IF=1.380).
Ahmad S.I., Hashim H., Hassim M.H., “Optimal landfill gas utilization for renewable energy production”, Process Safety and Environmental Protection (2014) (IF=2.551).
Ahmed S.I., Johari A., Hashim H., Mat R., Lim J.S., Ngadi N., Ali A., “Parametric investigations on proton conducting membrane by radiation induced grafting of 4-vinylpyridine onto poly(vinylidene fluoride) and phosphoric acid doping”, Environmental Progress & Sustainable Energy (2014) (IF=1.403).
Sapawe N., Syahrullail S., Jalil A.A., Triwahyono S., Azwan S.M.S., “Vapor-liquid equilibrium of ethanol/ethyl acetate mixture in ultrasonic intensified environment”, Journal of the Taiwan Institute of Chemical Engineers (2014) (IF=3.000).
Kamarudin, NHN; Jalil, AA; Triwahyono, S; Artika, V; Salleh, NFM; Karim, AH; Jaafar, NF; Sazegar, MR; Mukti, RR; Hameed, BH; Johari, A, “Variation of the crystal growth of mesoporous silica nanoparticles and the evaluation to ibuprofen loading and release”, Journal Of Colloid And Interface Science (2014) Vol 421, pgs.6-13. (IF=3.368).

Index By Scopus

Ashnani, MHM; Johari, A; Hashim, H; Hasani, “A Decision Support System (DSS) for Sustainable Production of Biofuel”, Applied Mechanics and Materials (2014) Vol 465-466, pgs. 1103–1108.
Johari, A; Nyakuma, BB; Ahmad, A; Abdullah, TAT; Kamaruddin, MJ; Mat, R; Ali, A, “Design of a Bubbling Fluidized Bed Gasifier for the thermochemical conversion of Oil Palm Empty Fruit Bunch Briquette”, Advances In Applied Mechanics And Materials (2014) Vol 493, pgs. 3–8.
Kamaruddin, MJ; Zaini, MAA; Johari, A; Abdullah, TAT, “Dielectric Properties for the Ring Opening Polymerisation of epsilon-Caprolactone”, Advances in Applied Mechanics and Materials (2014) Vol 493, pgs. 621–627.
Abdullah, TAT; Nabgan, W; Kamaruddin, MJ; Mat, R; Johari, A; Ahmad, A, “Hydrogen production from acetic acid steam reforming over bimetallic Ni-Co on La2O3 catalyst-Effect of the catalyst dilution”, Advances In Applied Mechanics And Materials (2014) Vol 493, pgs. 39–44.
Mohammadi Ashnani, M.H., Johari, A., Hashim, H., Hasani, E. , “Life Cycle Assessment of Palm Oil Biodiesel Production in Malaysia”, Applied Mechanics And Materials (2014) Vol 465 pgs. 466.
Mat, R; Samsudin, RA; Mohamed, M; Johari, A; Kamaruddin, MJ; Ali, A, “Ultrasonic enhancement of separation azeotropic mixtures via single distillation column”, Advances In Applied Mechanics And Materials (2014) Vol 493, pgs.15-20.
Wahid H., Ahmad A., “A computational intelligence approach to solve the inverse problem of electrical DC resistivity sounding”, Jurnal Teknologi (Sciences and Engineering) (2014) Vol 69-8, pgs. 115―120.
Nyakuma B.B., Abimbola Oladokun O., Johari A., Ahmad A., Tuan Abdullah T.A, “A simplified model for gasification of oil palm empty fruit bunch briquettes”, Jurnal Teknologi (Sciences and Engineering) (2014) Vol 69(2), pgs. 7―9.
Kidam K., Kamarden H., Hurme M., Hashim M.H., Kasmani R.M., “Accident contributor interconnection study as a basis for accident mechanism prediction”, Chemical Engineering Transactions (2014) Vol 36, pgs. 25―30.
Sulaiman W.R.W., Azizan N., Jaafar M.Z., Ismail A.R., Hamid M.A., Johari A., Mat R., Kamaruddin M.J., Ali A., “Additional gas resource for coal bed methane by applying underground coal gasification and enhanced coal bed methane”, Advanced Materials Research(2014)Vol 931-932, pgs.1020―1024.
Zaini N., Kamarudin K.S.N., “Adsorption of carbon dioxide on monoethanolamine (MEA)-impregnated kenaf core fiber by pressure swing adsorption system (PSA)”, Jurnal Teknologi (Sciences and Engineering) (2014) Vol 68(5), pgs. 11―16.
Alias N., Kamarudin K.S.N., Ghazali N.A., Mohd T.A.T., Sauki A., Jaafar M.R., “Carbon dioxide separation using amine modified zeolite in pressure swing adsorption system”, Key Engineering Materials (2014) Vol 594-595, pgs. 160―167.
Johari A., Mat R., Kamaruddin M.J., Tuan Abdullah T.A., Sulaiman W.R.W., Ali A., “Combustion of municipal solid waste in a pilot scale fluidized bed combustor”, Advanced Materials Research (2014) Vol 931-932, pgs. 1015―1019.
Kamaruddin M.J., Johari A., Mat R., Tuan Abdullah T.A., Mohd Setapar S.H., Sulaiman W.R.W., Ali A., “Dielectric relaxation process and microwave heating mechanism in Îµ- Caprolactone as a function of frequency and temperature”, Advanced Materials Research (2014) Vol 931-932, pgs. 205-209.
Ali A., Yunus R.M., Awang M., Johari A., Mat R., “Effect of cellulose acetate phthalate (CAP) on characteristics and morphology of polysulfone/cellulose acetate phthalate (PSf/CAP) blend membranes”, Applied Mechanics and Materials (2014) Vol 493, pgs.640―644.
Ali A., Awang M., Mat R., Johari A., Kamaruddin M.J., Sulaiman W.R.W., “Influence of hydrophilic polymer on pure water permeation, permeability coefficient, and porosity of polysulfone blend membranes”, Advanced Materials Research (2014) Vol 931-932, pgs. 168―172.
Ng R.T.L., Hassim M.H., Ng D.K.S., Tan R.R., El-Halwagi M.M., “Municipal solid waste management and potential revenue from recycling in Malaysia”, Computer Aided Chemical Engineering (2014) Vol 34, pgs. 579―584.
Johari A., Alkali H., Hashim H., Ahmed S.I., Mat R., “New CO2 adsorbent containing aminated poly(glycidyl methacrylate) grafted onto irradiated PE-PP nonwoven sheet”, Modern Applied Science (2014) Vol 8(4), pgs.37―49.
Mat R., Buhari J., Mohamed M., Johari A., Abdullah T.A.T., Ali A., “Protonation of Al-grafted mesostructured silica nanoparticles (MSN): Acidity and catalytic activity for cumene conversion”, Advanced Materials Research (2014) Vol 845, pgs.457-461.
Liew W.H., Hassim M.H., Ng D.K.S., “Synthesis of CaOZnO nanoparticles catalyst and its application in transesterification of Refined Palm Oil”, Clean Technologies and Environmental Policy (2014).
Yulianti C.H., Ediati R., Hartanto D., Purbaningtias T.E., Chisaki Y., Jalil A.A., Hitam C.K.N.L.C.K., Prasetyoko D., “Synthesis of reverse micelle alpha-FeOOH nanoparticles in ionic liquid as an only electrolyte: Inhibition of electron-hole pair recombination for efficient photoactivity”, Bulletin of Chemical Reaction Engineering and Catalysis (2014) Vol 9-2. Pgs.100-110.
Amzirin M.I., Hassim M.H., Kasmani R.M., Kidam K., Mat R., “The influence of 90 degree bends in closed pipe system on the explosion properties using hydrogen-enriched methane”, Chemical Engineering Transactions (2014) Vol 36, pgs. 91-96.
Sulaiman S.Z., Kasmani R.M., Kiah M.H.M., Kidam K., Hassim M.H., Ibrahim N., Ali R.R., “Thermogravimetric analysis of char waste from the air gasification of empty fruit Bunch Briquette”, Chemical Engineering Transactions (2014) Vol 36, pgs. 271-276.
Nyakuma B.B., Mazangi M., Johari A., Ahmad A., Tuan Abdullah T.A., “Thermogravimetric analysis of the fuel properties of empty fruit bunch briquettes”, MATEC Web of Conferences (2014) Vol 13.
Nyakuma B.B., Johari A., Ahmad A., Abdullah T.A.T., “Trans-esterification of Triglycerides with Methanol on Sulfated Zirconia Prepared with different concentration of Sulfuric Acid” , Jurnal Teknologi (Sciences and Engineering) (2014) Vol 67(3), pgs. 79-82.
Mahdi T., Ahmad A., Ripin A., Nasef M.M., “Utilization of zirconia and zinc incorporated HY zeolite as visible-light-driven-catalyst for the removal of methylene blue: Evaluation by central composite design analysis”, Advanced Materials Research (2014) Vol 909, pgs. 83-87.

” sticky_enabled=”0″][/dsm_advanced_tabs_child][dsm_advanced_tabs_child dsm_title=”2013″ _builder_version=”4.27.3″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” parentOrderClass=”dsm_advanced_tabs_0″ dsm_content=”

Publication for 2013

Index by Web of Science

Sapawe,A. A. Jalil, S. Triwahyono, R.N. R.A. Sah, N.W. C. Jusoh, N.H.H. Hairom, J.Efendi, %22Electrochemical strategy for grown ZnO nanoparticles deposited onto HY zeolite with enhanced photodecolorization of methylene blue: Effect of the formation of Si-O-Zn bonds%22, Applied Catalysis A : General 456(2013)144-158(IF=3.903).
Sapawe, A. A. Jalil, S. Triwahyono, %22One-pot electro-synthesis of ZrO2-ZnO/HY nanocomposite for photocatalytic decolorization of various dye-contaminants%22, Accepted in Chemical Engineering Journal(IF=3.461).
D. Setiabudi,A.A. Jalil, S. Triwahyono, %22Ir/Pt-HZSM5 for n-pentane isomerization: Effect of Si/Al ratio and reaction optimization by response surface methodology%22 Chemical Engineering Journal 217(2013)300-309(IF=3.461).
Triwahyono,A.A. Jalil, N.N. Ruslan, H.D. Setiabudi, N.H.N. Kamarudin, %22C5-C7 linear alkane hydroisomerization over MoO3-ZrO2 and Pt/MoO3-ZrO2 catalysts%22, Accepted in Journal of Catalysis. (IF=6.002).
N. Timmiati,A.A Jalil, S. Triwahyono, H.D. Setiabudi, N.H.R. Annuar, %22Formation of acidic Brönsted (MoOx)-(Hy)+ evidenced by XRD and 2,6-lutidine FTIR Spectroscopy for cumene cracking%22, Accepted in Applied Catalysis A : General (IF=3.903).
A. Jalil, M.A.H. Satar, S. Triwahyono, H.D. Setiabudi, N.H.N. Kamarudin, N.F. Jaafar, N. Sapawe, R. Ahamad, “ Tailoring the current density to enhance photocatalytic activity of CuO/HY for decolorization of malachite green”, Journal of Electroanalytical Chemistry, in revision(IF=2.905).
S.N. Kamarudin, N. Alias. Adsorption performance of MCM-41 impregnated with amine for CO₂ removal. Fuel Processing Technology, Volume 106, February 2013, Pages 332-337(IF=2.945)

Index By Scopus

M.M. Nasef, E. Shamsaei, P. Ghassemi, A. A. Aly, A. H. Yahaya (2013), Modeling, prediction, and multifactorial optimization of radiation induced grafting of 4-vinylpyridine onto poly(vinylidene fluoride) films using statistical simulator. J Applied Polymer Science, 127 (3) 1659–1666.

M. M. Nasef, E. Shamsaei, H. Saidi, A. Ahmad, K. Z.M. Dahlan. (2013). Preparation and characterization of phosphoric acid composite membrane by radiation induced grafting of 4-vinylpyridine onto poly(ethylene-co-tetrafluoroethylene) followed by phosphoric acid doping. Journal of Applied Polymer Science, 128 (1) 549-557.

M. Nasef, A.A. Aly, H. Saidi (2013) Composite proton conducting membrane by radiation induced grafting of 1-vinylimidazole onto poly(ethylene-co-tetrafluoroethylene) and phosphoric acid doping. High Performance Polymers. 25 (2)196-202.

H. Ilbeygi, A.F. Ismail, M.M. Nasef, J. Jaafar, E. Jalalvandi, P. Panahi (2013) Electerochemical Study of Speek/Cloisite 15A^®/TAP Membrane at Moderate Temperature for DMFC Application. Advanced Materials Research, 684, 80-84.

M. M. Nasef, H. Saidi, A. Ahmad. (2013) Optimization and kinetics of phosphoric acid doping of poly (1-vinylimidazole)-graft-poly(ethylene-co-tetrafluorethylene)proton conducting membrane precursors. Journal of Membrane Science, 446, 422-432.

Hossein Kiani, Mohamed Mahmoud Nasef, Ali Javadi, Ebrahim Abouzari-Lotf, Firouzeh Nemati. (2013). Highly refractive, transparent, and solution processable polyamides based on a noncoplanar ortho-substituted sulfonyl-bridged diacid monomer containing chlorine side groups. Journal Polymer Research 20, 247-258.

H. Ilbeygi, A.F. Ismail, A. Mayahi, M.M. Nasef, J. Jaafar, E. Jalalvandi (2013) “Transport properties and direct methanol fuel cell performance of sulfonated poly (ether ether ketone)/Cloisite/triaminopyrimidine nanocomposite polymer electrolyte membrane at moderate temperature” journal of Separation and purification Technology, 118, 567 – 575.

M. Hamdzah, Z. Ujang, M.M. Nasef, H. Hassan, F.A. Dahalan. Optimization of parameters affecting adsorption of Nickel (II), Zinc (II) and Plumbum (II) by Dowex 50W resin using response surface methodology approach, Journal of Environmental, Science and Technology, 6, Number 3, 106-118, 2013.

Book chapters

M.M. Nasef, H. Saidi, H. Uthman, P. Sithambaranathan. Advances in Membranes for High Temperature Polymer Electrolyte Membrane Fuel Cells. In: Inamuddin (ed.) Advanced functional polymers and composites: materials, devices and allied applications. Chapter 1, Vol. 1, 2013, Nova Science Publishers, Inc., USA. ISBN: 978-1-62948-055-8.
S. Ahmad, M. M. Nasef, M. Abdullah, M.H. Flaifel. Magnetic Polymeric Nanocomposite Materials: Basic Principles Preparations and Microwave Absorption Application. In: Inamuddin (ed.) Advanced functional polymers and composites: materials, devices and allied applications. Chapter 3, Vol. 1, 2013, Nova Science Publishers, Inc., USA. ISBN: 978-1-62948-055-8.

International conferences

Mohamed Mahmoud Nasef, Nadiah Khairul Zaman, Abdul Hamid Yahaya, Preparation of poly(glycidylmethacrylate) by radiation induced emulsion polymerization, proceedings of 11th International Conference on Chemistry and Its role in development (ICCRD-2013), Sharm El-Sheikh, Egypt, 11 -15, 2013, S5-PP1 page 37.
Mohamed Mahmoud Nasef, Ting Teo Ming, Douglas Kwesie,Zaini Ujang. Alternative microfibrous polymer adsorbents for environmental remediation by radiation induced grafting and selective functionalization. Collaborative Conference on 3D & Materials Research (CC3DMR) 2013, Jeju, South Korea, 24-28 June 2013.
Mohamed Mahmoud Nasef. Radiation grafted microfibrous sheets containing functionalized poly(glycidylmethacrylate) for environmental applications. The 11th International Conference on Membrane Science and Technology 2013, Kuala Lumpur, 27-29 August 2013.
Mohamed Mahmoud Nasef, Douglas Kwesie, Ali Abbasi, T.M. Ting, Khairul Suzana Kamarudin. New CO₂ adsorbent with aminated poly(glycidyl methacrylate) radiochemically grafted onto polyethylene nonwoven sheets. The 11th International Conference on Membrane Science and Technology 2013, Kuala Lumpur, 27-29 August 2013.
Atefeh Rafiei manesh, Abbas Shockravi, Mohamed Mahmoud Nasef, Ebrahim Abouzari-Lotf, Masoomeh Saremi. Preparation and gas separation properties of novel polyoxadiazoles containing noncoplanar 1,1′-thiobis(2-naphthoxy) groups. The 11th International Conference on Membrane Science and Technology 2013, Kuala Lumpur, 27-29 August 2013.
Nadiah Khairul Zaman, Mohamed Mahmoud Nasef, Kamaruddin Hashim. Novel glucamine containing adsorbent based on blended chitosan/poly(glycidyl methacrylate) electrospun nanofibrous sheet. The 11th International Conference on Membrane Science and Technology 2013, Kuala Lumpur, 27-29 August 2013.
T. M. Ting, Mohamed Mahmoud Nasef, Kamaruddin Hashim. New radiation grafted boron selective adsorbent sheets containing poly(vinyl benzyl chloride) functionalized with N-methyl-D-glucamine. The 11th International Conference on Membrane Science and Technology 2013, Kuala Lumpur, 27-29 August 2013.
H. Ilbeygi, A.F.Ismail, M.M. Nasef, J. Jaafar “Prediction of proton conductivity for nanocomposite membrane using response surface methodology”. The 11th International Conference on Membrane Science and Technology 2013, Kuala Lumpur, 27-29 August 2013.
M. Nasef, H. Saidi, A. Ahmad. Alternative composite membranes for high temperature PEM fuel cell based on phosphoric acid doped basic radiation grafted films. HPI-FAPS International Conference on Innovation in Polymer science and Technology 2013, Inna Garuda Hotel, Yogyakarta, Indonesia October 7-10, 2013.

” sticky_enabled=”0″][/dsm_advanced_tabs_child][dsm_advanced_tabs_child dsm_title=”2012″ _builder_version=”4.27.3″ _module_preset=”default” global_colors_info=”{}” parentOrderClass=”dsm_advanced_tabs_0″][/dsm_advanced_tabs_child][dsm_advanced_tabs_child dsm_title=”2011″ _builder_version=”4.27.3″ _module_preset=”default” global_colors_info=”{}” parentOrderClass=”dsm_advanced_tabs_0″][/dsm_advanced_tabs_child][/dsm_advanced_tabs]