Publication for 2014

Index by Web of Science

1. Ashnani, MHM; Johari, A; Hashim, H; Hasani, E, “A source of renewable energy in Malaysia, why biodiesel?” Renewable & Sustainable Energy Reviews (2014) Vol 35, 244–257.(IF=5.901).
2. Johari, A; Mat, R; Alias, H; Hashim, H; Hassim, MH; Zakaria, ZY; Rozainee, M. “Combustion Characteristics of Refuse Derived Fuel (RDF) in a Fluidized Bed Combustor”, Sains Malaysiana (2014) Vol 43(1), pgs. 103–109.(IF=0.48)
3. Abbaszadeh, S; Hassim, MH. “Comparison of methods assessing environmental friendliness of petrochemical process design”, Journal Of Cleaner Production (2014) Vol 71, pgs.110–117. (IF=3.844)
4. Annuar, NHR; Jalil, AA; Triwahyono, S; Fatah, NAA; Teha, LP; Mamat, CR, “Cumene cracking over chromium oxide zirconia: Effect of chromium(VI) oxide precursors”, Applied Catalysis A: General (2014) Vol 475, pgs. 487–496. (IF=3.942)
5. Abbasi A., Nasef M.M., Takeshi M., Faridi-Majidi R., “Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships”; Chinese Journal of Polymer Science (English Edition) (2014) Vol 32(6), pgs.793―804.(IF=1.27).
6. Abdullah, TAT; Croiset, E, “Evaluation of an Inconel-625 Reactor and its Wall Effects on Ethanol Reforming in Supercritical Water”, Industrial & Engineering Chemistry Research (2014) Vol 53(6), pgs. 2121–2129.(IF=3.512).
7. Aziz, MAA; Jalil, AA; Triwahyono, S; Mukti, RR; Taufiq-Yap, YH; Sazegar, MR, “Highly active Ni-promoted mesostructured silica nanoparticles for CO2 methanation”, Applied Catalysis B: Environmental (2014) Vol 147, pgs. 359–368.(IF=7.435)
8. Lani N.S., Ngadi N., Johari A., Jusoh M., “Isolation, Characterization, and Application of Nanocellulose from Oil Palm Empty Fruit Bunch Fiber as Nanocomposites”, Journal Of Nanomaterials (2014) Vol 421, pgs. 93–102.(IF=1.644)
9. Ashnani, MHM; Johari, A; Hashim, H; Hasani, E, “Life cycle optimisation (LCO) of product systems with consideration of occupational fatalities”, 4th Mechanical And Manufacturing Engineering, Pts 1 And 2 (2014) Vol 465-466, pgs. 1080-1086.(IF=2.55).
10. Nasef, MM; Ali, AA; Saidi, H; Ahmad, A, “Multi-objective design of industrial symbiosis in palm oil industry”, Radiation Physics And Chemistry (2014) Vol 94(1), pgs. 123–128. (IF=1.380).
11. Abouzari-Lotf E., Shockravi A., Rafieimanesh A., Saremi M., Javadi A., Nasef M.M., “Numerical Descriptive Inherent Safety Technique (NuDIST) for inherent safety assessment in petrochemical industry”, RSC Advances (2014) Vol 4(35), pgs. 17993―18002. (IF=3.84).
12. Shamsaei, E; Nasef, MM; Saidi, H; Yahaya, AH, “Preparation of Ni loaded on zeolite and its application for conversion of glycerol to hydrogen”, Radiochimica Acta (2014) Vol 102(4), pgs. 351–362. (IF=1.373)
13. Sazegar, MR; Jalil, AA; Triwahyono, S; Mukti, RR; Aziz, M; Aziz, MAA; Setiabudi, HD; Kamarudin, NHN, “Review of evolution, technology and sustainability assessments of biofuel production”, Chemical Engineering Journal (2014) Vol 240, pgs. 352–361. (IF=4.321)
14. Liew, WH; Hassim, MH; Ng, DKS, “Selective Acetalization of Glycerol with Acetone Over Nickel Nanoparticles Supported on Multi-Walled Carbon Nanotubes”, Journal Of Cleaner Production (2014) Vol 71, pgs.11-29. (IF=3.844)
15. Khayoon, MS; Abbas, A; Hameed, BH; Triwahyono, S; Jalil, AA; Harris, AT; Minett, AI, “Self-Organizing Map Based Fault Diagnosis Technique for Non-Gaussian Processes”, Catalysis Letters (2014) Vol 144(6), pgs.1009–1015. (IF=2.244)
16. Yu, HY; Khan, F; Garaniya, V; Ahmad, A, “Sustainability assessment for biodiesel production via fuzzy optimisation during research and development (R&D) stage”, Industrial & Engineering Chemistry Research (2014) Vol 53(21), pgs. 8831–8843. (IF=2.20)
17. Jusoh, R; Jalil, AA; Triwahyono, S; Idris, A; Haron, S; Sapawe, N; Jaafar, NF; Jusoh, NWC, “The effectiveness of emergency response plan in specialty chemicals company in Malaysia”, Applied Catalysis A: General (2014) Vol 469, pgs. 33-44. (IF=3.942)
18. Mahdi, T; Ahmad, A; Ripin, A; Nasef, MM, “Variation of the crystal growth of mesoporous silica nanoparticles and the evaluation to ibuprofen loading and release”, Korean Journal Of Chemical Engineering (2014) Vol 31-5, pgs. 875-880. (IF=1.059)
19. Al-shanini A., Ahmad A., Khan F., “Accident modelling and safety measure design of a hydrogen station”, International Journal of Hydrogen Energy (2014). (IF=3.133).
20. Kidam K., Hussin N.E., Hassan O., Ahmad A., Johari A., Hurme M., “Accident prevention approach throughout process design life cycle”, Process Safety and Environmental Protection (2014) (IF=2.551).
21. El-Hefian E.A., Nasef M.M., Yahaya A.H., “Chitosan-based polymer blends: Current status and applications”, Journal of the Chemical Society of Pakistan (2014) Vol 36(1), pgs. 11―27.(IF=0.612).
22. Mokhtar M.M., Hassim M.H., Taib R.M., “Health risk assessment of emissions from a coal-fired power plant using AERMOD modelling”, Process Safety and Environmental Protection (2014) (IF=2.551).
23. Khayoon M.S., Triwahyono S., Hameed B.H., Jalil A.A., “Improved production of fuel oxygenates via glycerol acetylation with acetic acid”, Chemical Engineering Journal (2014) Vol 243, pgs.473―484. (IF=4.321).
24. Karim A.H., Jalil A.A., Triwahyono S., Kamarudin N.H.N., Ripin A., “Influence of multi-walled carbon nanotubes on textural and adsorption characteristics of in situ synthesized mesostructured silica”, Journal of Colloid and Interface Science (2014) Vol 421, pgs. 93―102. (IF=3.368).
25. Ramadhan N.J., Wan Y.K., Ng R.T.L., Ng D.K.S., Hassim M.H., Aviso K.B., Tan R.R., “Measurement of PCDD/Fs emissions from a coal-fired power plant in Malaysia and establishment of emission factors”, Process Safety and Environmental Protection (2014) (IF=2.551).
26. Mokhtar M.M., Taib R.M., Hassim M.H., “Modeling and optimization aspects of radiation induced grafting of 4-vinylpyridene onto partially fluorinated films”, Atmospheric Pollution Research (2014) Vol 5(3), pgs. 388―397. (IF=1.371).
27. Mahmoud Nasef M., Abbasi A., Ting T.M., “Novel polyoxadiazoles with non-coplanar ortho-linked structures as highly CO2 permselective membranes”, Radiation Physics and Chemistry (2014) Vol 103, pgs.72-74 (IF=1.380).
28. Ahmad S.I., Hashim H., Hassim M.H., “Optimal landfill gas utilization for renewable energy production”, Process Safety and Environmental Protection (2014) (IF=2.551).
29. Ahmed S.I., Johari A., Hashim H., Mat R., Lim J.S., Ngadi N., Ali A., “Parametric investigations on proton conducting membrane by radiation induced grafting of 4-vinylpyridine onto poly(vinylidene fluoride) and phosphoric acid doping”, Environmental Progress & Sustainable Energy (2014) (IF=1.403).
30. Sapawe N., Syahrullail S., Jalil A.A., Triwahyono S., Azwan S.M.S., “Vapor-liquid equilibrium of ethanol/ethyl acetate mixture in ultrasonic intensified environment”, Journal of the Taiwan Institute of Chemical Engineers (2014) (IF=3.000).
31. Kamarudin, NHN; Jalil, AA; Triwahyono, S; Artika, V; Salleh, NFM; Karim, AH; Jaafar, NF; Sazegar, MR; Mukti, RR; Hameed, BH; Johari, A, “Variation of the crystal growth of mesoporous silica nanoparticles and the evaluation to ibuprofen loading and release”, Journal Of Colloid And Interface Science (2014) Vol 421, pgs.6-13. (IF=3.368).

Index By Scopus

1. Ashnani, MHM; Johari, A; Hashim, H; Hasani, “A Decision Support System (DSS) for Sustainable Production of Biofuel”, Applied Mechanics and Materials (2014) Vol 465-466, pgs. 1103–1108.
2. Johari, A; Nyakuma, BB; Ahmad, A; Abdullah, TAT; Kamaruddin, MJ; Mat, R; Ali, A, “Design of a Bubbling Fluidized Bed Gasifier for the thermochemical conversion of Oil Palm Empty Fruit Bunch Briquette”, Advances In Applied Mechanics And Materials (2014) Vol 493, pgs. 3–8.
3. Kamaruddin, MJ; Zaini, MAA; Johari, A; Abdullah, TAT, “Dielectric Properties for the Ring Opening Polymerisation of epsilon-Caprolactone”, Advances in Applied Mechanics and Materials (2014) Vol 493, pgs. 621–627.
4. Abdullah, TAT; Nabgan, W; Kamaruddin, MJ; Mat, R; Johari, A; Ahmad, A, “Hydrogen production from acetic acid steam reforming over bimetallic Ni-Co on La2O3 catalyst-Effect of the catalyst dilution”, Advances In Applied Mechanics And Materials (2014) Vol 493, pgs. 39–44.
5. Mohammadi Ashnani, M.H., Johari, A., Hashim, H., Hasani, E. , “Life Cycle Assessment of Palm Oil Biodiesel Production in Malaysia”, Applied Mechanics And Materials (2014) Vol 465 pgs. 466.
6. Mat, R; Samsudin, RA; Mohamed, M; Johari, A; Kamaruddin, MJ; Ali, A, “Ultrasonic enhancement of separation azeotropic mixtures via single distillation column”, Advances In Applied Mechanics And Materials (2014) Vol 493, pgs.15-20.
7. Wahid H., Ahmad A., “A computational intelligence approach to solve the inverse problem of electrical DC resistivity sounding”, Jurnal Teknologi (Sciences and Engineering) (2014) Vol 69-8, pgs. 115―120.
8. Nyakuma B.B., Abimbola Oladokun O., Johari A., Ahmad A., Tuan Abdullah T.A, “A simplified model for gasification of oil palm empty fruit bunch briquettes”, Jurnal Teknologi (Sciences and Engineering) (2014) Vol 69(2), pgs. 7―9.
9. Kidam K., Kamarden H., Hurme M., Hashim M.H., Kasmani R.M., “Accident contributor interconnection study as a basis for accident mechanism prediction”, Chemical Engineering Transactions (2014) Vol 36, pgs. 25―30.
10. Sulaiman W.R.W., Azizan N., Jaafar M.Z., Ismail A.R., Hamid M.A., Johari A., Mat R., Kamaruddin M.J., Ali A., “Additional gas resource for coal bed methane by applying underground coal gasification and enhanced coal bed methane”, Advanced Materials Research(2014)Vol 931-932, pgs.1020―1024.
11. Zaini N., Kamarudin K.S.N., “Adsorption of carbon dioxide on monoethanolamine (MEA)-impregnated kenaf core fiber by pressure swing adsorption system (PSA)”, Jurnal Teknologi (Sciences and Engineering) (2014) Vol 68(5), pgs. 11―16.
12. Alias N., Kamarudin K.S.N., Ghazali N.A., Mohd T.A.T., Sauki A., Jaafar M.R., “Carbon dioxide separation using amine modified zeolite in pressure swing adsorption system”, Key Engineering Materials (2014) Vol 594-595, pgs. 160―167.
13. Johari A., Mat R., Kamaruddin M.J., Tuan Abdullah T.A., Sulaiman W.R.W., Ali A., “Combustion of municipal solid waste in a pilot scale fluidized bed combustor”, Advanced Materials Research (2014) Vol 931-932, pgs. 1015―1019.
14. Kamaruddin M.J., Johari A., Mat R., Tuan Abdullah T.A., Mohd Setapar S.H., Sulaiman W.R.W., Ali A., “Dielectric relaxation process and microwave heating mechanism in ε- Caprolactone as a function of frequency and temperature”, Advanced Materials Research (2014) Vol 931-932, pgs. 205-209.
15. Ali A., Yunus R.M., Awang M., Johari A., Mat R., “Effect of cellulose acetate phthalate (CAP) on characteristics and morphology of polysulfone/cellulose acetate phthalate (PSf/CAP) blend membranes”, Applied Mechanics and Materials (2014) Vol 493, pgs.640―644.
16. Ali A., Awang M., Mat R., Johari A., Kamaruddin M.J., Sulaiman W.R.W., “Influence of hydrophilic polymer on pure water permeation, permeability coefficient, and porosity of polysulfone blend membranes”, Advanced Materials Research (2014) Vol 931-932, pgs. 168―172.
17. Ng R.T.L., Hassim M.H., Ng D.K.S., Tan R.R., El-Halwagi M.M., “Municipal solid waste management and potential revenue from recycling in Malaysia”, Computer Aided Chemical Engineering (2014) Vol 34, pgs. 579―584.
18. Johari A., Alkali H., Hashim H., Ahmed S.I., Mat R., “New CO2 adsorbent containing aminated poly(glycidyl methacrylate) grafted onto irradiated PE-PP nonwoven sheet”, Modern Applied Science (2014) Vol 8(4), pgs.37―49.
19. Mat R., Buhari J., Mohamed M., Johari A., Abdullah T.A.T., Ali A., “Protonation of Al-grafted mesostructured silica nanoparticles (MSN): Acidity and catalytic activity for cumene conversion”, Advanced Materials Research (2014) Vol 845, pgs.457-461.
20. Liew W.H., Hassim M.H., Ng D.K.S., “Synthesis of CaOZnO nanoparticles catalyst and its application in transesterification of Refined Palm Oil”, Clean Technologies and Environmental Policy (2014).
21. Yulianti C.H., Ediati R., Hartanto D., Purbaningtias T.E., Chisaki Y., Jalil A.A., Hitam C.K.N.L.C.K., Prasetyoko D., “Synthesis of reverse micelle alpha-FeOOH nanoparticles in ionic liquid as an only electrolyte: Inhibition of electron-hole pair recombination for efficient photoactivity”, Bulletin of Chemical Reaction Engineering and Catalysis (2014) Vol 9-2. Pgs.100-110.
22. Amzirin M.I., Hassim M.H., Kasmani R.M., Kidam K., Mat R., “The influence of 90 degree bends in closed pipe system on the explosion properties using hydrogen-enriched methane”, Chemical Engineering Transactions (2014) Vol 36, pgs. 91-96.
23. Sulaiman S.Z., Kasmani R.M., Kiah M.H.M., Kidam K., Hassim M.H., Ibrahim N., Ali R.R., “Thermogravimetric analysis of char waste from the air gasification of empty fruit Bunch Briquette”, Chemical Engineering Transactions (2014) Vol 36, pgs. 271-276.
24. Nyakuma B.B., Mazangi M., Johari A., Ahmad A., Tuan Abdullah T.A., “Thermogravimetric analysis of the fuel properties of empty fruit bunch briquettes”, MATEC Web of Conferences (2014) Vol 13.
25. Nyakuma B.B., Johari A., Ahmad A., Abdullah T.A.T., “Trans-esterification of Triglycerides with Methanol on Sulfated Zirconia Prepared with different concentration of Sulfuric Acid” , Jurnal Teknologi (Sciences and Engineering) (2014) Vol 67(3), pgs. 79-82.
26. Mahdi T., Ahmad A., Ripin A., Nasef M.M., “Utilization of zirconia and zinc incorporated HY zeolite as visible-light-driven-catalyst for the removal of methylene blue: Evaluation by central composite design analysis”, Advanced Materials Research (2014) Vol 909, pgs. 83-87.